O’tatmo

 Shining Passion

O’tatmo

 Shining Passion

1. Prepare your devices

Otatmo Lightband can be reprogrammed via a smartphone (Android, iOS, Windows phone) or a computer with internet connection.
You can select your flash pattern(s), select light color(s) or create your own light color(s), and customise other functionalites.

Watch demo video
First, let's get your devices ready.

Important: On your computer or smartphone, set the screen brightness to the maximum position.
On your Lightband, make sure the battery is not empty and the device is working properly.

2. Make your choice

Please select one or more flash patterns
Please select one or more light colors
Please select a brightness level
[?] Higher level means shorter battery life!
Cover sensor to turn light OFF
[?] For better battery life, this can only be disabled when NONE of Solid and Rainbow patterns are selected.
Double-clap to change light color
[?] This can be disabled when only 1 flash pattern is selected. When disabled, hit the button to change the light color.

3. Let's reprogram it!

On your Lightband, press and hold down the button for 5 seconds.
When the light is blinking GREEN, place the sensor of your Lightband inside the black box below. Then, hit Send.
When the trasmission is successful, the light will show solid GREEN. Press the button once to return to normal mode. In case of unsuccessful transmission, the light will turn RED for 1 second and then device waits for a new transmission. Hit the "Send" button to restart the transmission.
Ready
Send
Troubleshooting
Email
Print
TOP